banner
Home » Product > Emc LED > EMC 3030 SMD LED
Product Categories

SMD LED EMC3030

●​High life get the LM-80 6000H test report
●High luminous efficiency, 0.2W products can reach 210LM/W
●Light color, color capacity difference light, 3 order controllable
●High brightness and high stability
●Meet indoor and outdoor lighting application requirements

Send Inquiry

Feature:

      

●High life get the LM-80 6000H test report

●High luminous efficiency, 0.2W products can reach 210LM/W

●Light color, color capacity difference light, 3 order controllable

●High brightness and high stability

●Meet indoor and outdoor lighting application requirements

 

 

Color   temperature    

 Color

Power(w)

 

currentmA

 

Luminous flux(lm)

 

Forward voltage(v)

 

explicit reference

2700-7000

pure/warm white

1.6

30

170-210

54

80

2700-7000

 pure/warm white

1.35

30

140-170

42-46

80

2700-7000

pure/warm white

1.0

150

105-125

5.6-6.8

80

2700-7000

pure/warm white

1.0

100

110-130

8.6-9.8

80

2700-7000

pure/warm white

0.5

150

60-75

2.6-3.2

80

2700-7000

 nature white

0.2

60

28-34

2.6-3.2

80

 


 Typical optical characteristics curves 

图片29.png

图片30.png

图片31.png

图片32.png

图片33.png

图片34.png


 Color Bin Limit (IF = 60 mA) 


Handling Precautions

Compare to epoxy encapsulation that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more prone to damage by external mechanical force. As a result, Special handling precautions must be observed during assembling using silicone encapsulated LED product, Failure to comply might leads to damage and premature failure of the LED.

 

♦ Handle the component along the side surface by using forceps or appropriate tools; do not directly touch or handle the silicone lens surface, it may damage the internal circuitry.

♦ Not suitable to operate in acidic environment, PH<7.

 

♦ LED operating environment and sulfur element composition cannot be over 25 PPM in the LED mating usage material.

 

When we need to use external glue for LEDs application products, please make sure that the external gluematches the LEDs packaging glue. Additionally ,as most of LEDs packaging glue is silica gel, and it has strong Oxygen permeability as well as strong moisture permeability; in order to prevent external material from getting into the inside of LEDs, which may cause the malfunction of LEDs, the single content of Bromine 

element is required to be less than 225 PPM,the single content of Chlorine element is required to be less than225PPM,the total content of Bromine element and Chlorine element in the external glue of the applicationproducts is required to be less than  375 PPM.

 

♦ The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the top ofpackage. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions should betaken to avoid the strong pressure on the encapsulated part. So when using the picking up nozzle, the pressureon the silicone resin should be proper.

 

♦ Static electricity or surge voltage damages the LEDs. Damaged LEDs will show some unusual characteristicssuch as the lower forward voltage, or the not light at low current, even not light. All devices, equipment andmachinery must be properly grounded. At the same time, it is recommended that wrist bands oranti-electrostatic gloves, anti-electrostatic containers be used when dealing with the LEDs.

 

Storage

♦ Before opening the package, the LEDs should be kept at 30 or less and 60%RH or less. The LEDs shouldbe used within a year.

 

♦ After opening the package, the product should be stored at 30 or less and humidity less than 10% RH, andbe soldered within 24 H. It is recommended that the product be operated at the workshop condition of 30or less and humidity less than 60% RH. If unused LEDs remain, they should be stored in moisture proofpackages, such as sealed containers with packages of moisture absorbent material (silica gel). It is alsorecommended to return the LEDs to the original moisture proof bag and to reseal the moisture proof bagagain.


Application:

Street Light

Flood Light

Bulb Light

Highbay Light,etc

image001.jpg


Packaging & Delivery

Packaging Details

4000pcs/reel, each reel Anti-static vacuum Bag


Delivery Time

Shipped in 3-5 days after payment


image006.jpg


Delivery Dtails: 

1. Delivery Time: 3~7 Working Days for Standard Product. 

2. Delivery Way: By Air; Shenzhen Airport

 

Our Service

●All standard products in 3 years warantty.

●Reply your inquiry in 12 working hours.
●Well-trained and experienced staffs to answer all your inquiries in fluent English.
●Strict quality control procedures before shipment.
●LED Module (PCB Disign and Mounting LEDs on PCB) customized design is available. 
●Delivery the goods to our customer all over the world with speed and precision.

 

FAQ

1.What will be the delivery time?

A:We have large quantities in stock for normal color and size ,and for special color and size.It needs 3-5 days to customize.100K units is available for most of our models in normal color and size.

 

2.What will be the price terms?

A: We can accept FOB, EXW, CIF normally and other terms according to customers special requirement.

 

3. What will be the types of payment?

A: The payments we can accept are T/T transaction, Paypal, Western Union, Escrow, Money Gram and Chinese bank.

 

4. what is the color temperature for white light?

A:  HHE 's LED Lighting offer leds in warm, natural, pure and cool white with color temperatures measured  in Kelvin (K). 

The lower the color temperature is, the warmer the light given by the LED:

*Warm white = 2700K-3500K

*Natural white = 4000K-6000K

*Pure white = 6000K-9000K

*Cool white = 9000K-20000K


5.What is CRI ( Color Rendering Index)?

A: CRI is a figure which feedback the real objects colors. Higher CRI with higher cost. For leds, the CRI is mostly 70-80Ra.

 

6.What will be the types of shipping?

A: For the shipment, you can choose DHL, UPS,TNT,EMS,ARAMEX, FedEx, City-link line, China post, by air mail, and by sea, etc.

 

7.what relationship is between viewing angle and brightness of led?

A: For the leds with same chip, the smaller of the angle is, the brighter of the led is. Besides, the deeper of the holder dips into the lens is, the bigger of the angle is.

 

 

Company

3.jpg


Patents

zhengshu副本(001).jpg


image022.jpg

Alisa Huang

Guangdong Elite Optoelectronic Technology Co., LTD

Mobilephone:+86-18033336027

Tel:0769-89080660-824

Fax:0769-89080658

Email:ruilu_sales1@elitebm.com


Contact: Carol Chen

Mobilephone:+86-13798703095

Telephone:+86-769-88941998

Email:elite1@elitebm.com


Hot Tags: SMD LED emc3030, China, suppliers, manufacturers, price

Inquiry