banner
Home » Product > SMD LED > SMD LED 2835
Product Categories

2835 VS 5630 SMD LED

●size:2.8*3.5*0.8mm
●High Lumens Output & Low Brightness Decay
●Stable Performance & Great CCT Inity.
●Wid Color Temperature Range

Send InquiryChat Now

2835 LED Series:


Part NO.

Color

Power

Volt

Current

CCT/ Wavelength

CRI

Luminous Flux

SOL-2835X020-03

White

0.2W

2.8-3.4V

60mA

2700K 3000K 4000K
     5600K 6500K

>80

22-24LM

24-26LM

26-28LM

SOL-2835X050-03

White

0.5W

2.8-3.4V

150mA

2700K 3000K 4000K
     5600K 6500K

>80

55-60LM

60-65LM

65-70LM

SOL-2835X060-09

White

0.6W

9.2-9.8V

60mA

2700K 3000K 4000K
     5600K 6500K

>80

65-70LM

70-75LM

SOL-2835X060-18

White

0.6W

18.4-19.6V

30mA

2700K 3000K 4000K
     5600K 6500K

>80

65-70LM

70-75LM

SOL-2835X100-09

White

1W

9.2-9.8V

100mA

2700K 3000K 4000K 5600K 6500K

>80

110-120LM

120-130LM

SOL-2835X100-18

White

1W

18.4-19.6V

60mA

2700K 3000K 4000K 5600K 6500K

>80

110-130LM

SOL-2835X100-48

White

1W

46-51V

20mA

2700K 3000K 4000K 5600K 6500K

>80

110-130LM

 


 Typical optical characteristics curves

图片25.png图片26.png

图片27.png图片28.png图片29.png图片30.png



 Intensity Bin Limit (IF = 150 mA)

Bin code

Flux(lm) for reference

Min

Max

1

50

55

2

55

60

3

60

65

4

65

70

5

70

75

6

75

80

 VF Bin Limit (IF = 150 mA)

Bin code

Min.(V)

Max.(V)

1

2.6

2.8

2

2.8

3.0

3

3.0

3.2

4

3.2

3.4

5

3.4

3.6

 Chromaticity CIE 

图片31.png


 Color Bin Limit (IF = 150 mA)




Requirements for application and reflow soldering

Reflow Soldering

Pre-heat

 

120~160

Pro-heat time

 

120 seconds Max.

 

Peak temperature

 

245℃ Max.

 

Soldering time

 

10 seconds Max.

 

Condition

 

Refer to Temperature-profile


After reflow soldering rapid cooling should be avoided

Temperature-profile(Surface of circuit board)  

Use the following conditions shown in the figure.  

      <Pb-free solder>                                      <Lead solder>

图片34.png

1.Reflow soldering should not be done more than two times   

2.When soldering,do not put stress on the LEDs during heating



Our Advantage:

●Free samples are availale,3 years guarantee time.
●Perfect production line to guarantee perfect quality.
●Own the LED special dust-free, anti-static workshop. 
●Formed a number of world-class United States ASM automatic machine crystalline solid, 
●ASM automatic soldering machines, H120 automatic LED light colour scanner make sure the quality.

  

Packaging & Delivery

Packaging Details

4000pcs/reel, each reel Anti-static vacuum Bag


Delivery Time

Shipped in 3-5 days after payment

 

image005(002).jpg


 Application:

1. car: dashboard, brake lights, turn signals;

 

2. Backlight: LCD screen, keyboard, advertising keyboard;

 

3. Status indication: consumption or industrial electronic devices;

 

4. Other use occasions.

 

image001(013).jpg

Cautions:

1.Storage  
Before opening the package:The LEDs should be kept at 5~30°C and 60%RH or less. The LEDs should be used within a year. After opening the package:The LED must be used within 24 hours, else should be kept at 5~30℃ and 30% RH or less. The LEDs should be used within 7days after opening the package. If unused LEDs remain, they should be stored in moisture proof pachages .recommend to return the LEDs to the original moisture proof bag and to reseal the moisture proof bag again. If the LEDs have exceeded the storage time, baking treatment 
should be performed more than 24 hours at 60 ± 5°C.


2.Soldering Iron
  When hand soldering, keep the temperature of iron below less 300℃ less than 3 seconds
  The hand solder should be done only one times


3.Repairing 
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed in advance  whether the characteristics of LEDs will or will not be damaged by repairing.


Handling Precautions:

1.Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more prone to damage by external mechanical force . As a result, Special handling precautions must be observed during assembling using silicone encapsulated LED products, Failure to comply might leads to damage and premature failure of the LED.


2.Handle the component along the side surface by using forceps or appropriate tools; do not directly touch or Handle the silicone lens surface, it may damage the internal circuitry.


3.The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to
 prevent air leaks. The inner diameter of the nozzle should be  as large as possible. A pliable
 material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during 
pickup. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production.


4.Do not stack together assembled PCBs containing LEDs.Impact may scratch the silicone lens or damage the internal circuitry.


5.Not suitable to operate in acidic erivironmengt.PH<7.

 

FAQ

Q1.How to buy our products?

You can directly contact our sales team by email or make a call. We will respond with quick service maximum within 12 hours

 

Q2. Can I have a sample order for SMD LED chips?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

 

Q3.What about the lead time?

A:Sample needs 3-5 days, mass production time needs 5-7 days for order quantity of 100kk.

 

Q4.Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available

 

Q5. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

 

Q6.How to proceed an order for SMD LEDs ?

A: Firstly let us know your requirements or application. Secondly We quote according to your requirements or our suggestions. Thirdly customer confirms the samples and places deposit for formal order. Fourthly We arrange the production.

 

Q7.Do you offer guarantee for the products?

A: Yes, we offer 3 years  warranty to our products.

 

Company

01.JPG02.JPG

201711161630163857395.jpg


Patents

zhengshu副本(001).jpg


our service

1.For all your inquires about us or our products, we will reply you in details within 24 hours.
2.We provide 3-year warranty for our products.
3.We provide RoHS, CE, all kinds of certification.

 

image019(001).jpg


Alisa Huang

Guangdong Elite Optoelectronic Technology Co., LTD

Mobilephone:+86-18033336027

Tel:0769-89080660-824

Fax:0769-89080658

Email:ruilu_sales1@elitebm.com

 

Contact: Carol Chen

Mobilephone:+86-13798703095

Telephone:+86-769-88941998

Email:elite1@elitebm.com


Hot Tags: 2835 vs 5630 SMD LED, China, suppliers, manufacturers, price

Inquiry