banner
Home » Product > SMD LED > SMD LED 5630
Product Categories

SMD 5630 LED Chip Light

●RoHS Compliant
●High luminous intensity output
●Excellent character appearance
●Low voltage and current operating
●Ultra-low power consumption

Send Inquiry

Features


1, RoHS Compliant  

2, High luminous intensity output

3, Excellent character appearance

4, Low voltage and current operating

5, Ultra-low power consumption

6, Solid-state LED chip based

7, Long life-span

8, Easy mounting on printed circuit board and sockets

9, IC compatible

10, Certificates: RoHS and Reach compliant

11, Type:5630 SMD LED

 


 Package Outline      

Unit:mm

图片25.png

NOTES:  

1. All dimensions are in millimeters;   

2. Tolerances are±0.1mm unless otherwise noted.  



Absolute maximum ratings                              Ta=25±3


Parameter

Symbol

Value

Unit

Power dissipation

Pd

0.5

W

Forward current

If

150

mA

Reverse voltage

Vr

5

V

Operating temperature range

Topr

-40~+85

Storage temperaturer range

Tstg

-40~+100

Pulse Forward Current

Ifp

200

mA

Electrostatic Discharge

ESD

2000(HBM)

V


●Electro-optical characteristics                             Ta=25±3


Parameter

Test Condition

 

Symbol

 

Value

Unit

 

Min.

Typ.

Max.

Forward voltage

 

If=150 mA

Vf

6.0

--

7.0

V

Luminous intensity

 

If=150 mA

Φ

100

--

120

Lm

Viewing angle 50% Iv

If=150 mA

2θ 1/2

--

120

--

Deg

Reverse current

 

Vr=5V

Ir

--

--

10

μA

ColorTemperature

 

If=150 mA

TC

--

4000

--

K

Chromaticity CIE

 

If=150 mA

CIE

              Color different≤5

CRI

 

If=150 mA

Ra

80

 

NOTES: 




1.Luminous Flux measurement tolerance:±10%


2.Forward Voltage measurement tolerance:±0.1V


3.Color Temperature measurement tolerance:x,y±0.01


4.CRI measurement tolerance:±2




 Intensity Bin Limit (IF = 150 mA)  

Bin code

Flux(lm) for reference

Min

Max

1

90LM

100LM

2

100LM

110LM

3

110LM

120LM

4

120LM

130LM

5

130LM

140LM

6

--

--

7

--

--

8

--

--

9

--

--


 VF Bin Limit (IF = 150 mA)

Bin code

Min.(V)

Max.(V)

1

6.0

7.0

2

--

--

3

--

--

4

--

--

5

--

--


 Chromaticity CIE 

图片1.png


 Color Bin Limit (IF =150 mA)




Handling Precautions

 

Compare to epoxy encapsulation that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more prone to damage by external mechanical force. As a result, Special handling precautions must be observed during assembling using silicone encapsulated LED product, Failure to comply might leads to damage and premature failure of the LED.

 

♦ Handle the component along the side surface by using forceps or appropriate tools; do not directly touch or handle the silicone lens surface, it may damage the internal circuitry.

♦ Not suitable to operate in acidic environment, PH<7.

 

♦ LED operating environment and sulfur element composition cannot be over 25 PPM in the LED mating usage material.

 

When we need to use external glue for LEDs application products, please make sure that the external gluematches the LEDs packaging glue. Additionally ,as most of LEDs packaging glue is silica gel, and it has strong Oxygen permeability as well as strong moisture permeability; in order to prevent external material from getting into the inside of LEDs, which may cause the malfunction of LEDs, the single content of Bromine 

element is required to be less than 225 PPM,the single content of Chlorine element is required to be less than225PPM,the total content of Bromine element and Chlorine element in the external glue of the applicationproducts is required to be less than  375 PPM.

 

♦ The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the top ofpackage. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions should betaken to avoid the strong pressure on the encapsulated part. So when using the picking up nozzle, the pressureon the silicone resin should be proper.

 

♦ Static electricity or surge voltage damages the LEDs. Damaged LEDs will show some unusual characteristicssuch as the lower forward voltage, or the not light at low current, even not light. All devices, equipment andmachinery must be properly grounded. At the same time, it is recommended that wrist bands oranti-electrostatic gloves, anti-electrostatic containers be used when dealing with the LEDs.

 

Storage

♦ Before opening the package, the LEDs should be kept at 30 or less and 60%RH or less. The LEDs shouldbe used within a year.

 

♦ After opening the package, the product should be stored at 30 or less and humidity less than 10% RH, andbe soldered within 24 H. It is recommended that the product be operated at the workshop condition of 30or less and humidity less than 60% RH. If unused LEDs remain, they should be stored in moisture proofpackages, such as sealed containers with packages of moisture absorbent material (silica gel). It is alsorecommended to return the LEDs to the original moisture proof bag and to reseal the moisture proof bagagain.


Applications

●LCD backlighting

●Toys

●Signal and symbol luminary

●Optical indicator

●Pushbuttons and switches

●Outdoor displays

  

Packaging & Delivery

Packaging Details

4000pcs/reel, each reel Anti-static vacuum Bag


Delivery Time

Shipped in 3-5 days after payment


Shipping:


image003(007).jpg

 

After-sale Service:

Any Question for our products will be solved at the most prompt time,we always offer relative technical suppport and consultant quick respons ,all your inquiry will be replied within 24 hours.

 

Company

01.JPG02.JPG

201711161630163857395.jpg


Patents

zhengshu副本(001).jpg


Contact:

Alisa Huang

Guangdong Elite Optoelectronic Technology Co., LTD

Mobilephone:+86-18033336027

Tel:0769-89080660-824

Fax:0769-89080658

Email:ruilu_sales1@elitebm.com


Contact: Carol Chen

Mobilephone:+86-13798703095

Telephone:+86-769-88941998

Email:elite1@elitebm.com


Hot Tags: SMD 5630 LED chip light, China, suppliers, manufacturers, price

Inquiry