banner
Home » Product > SMD LED > SMD LED 5630
Product Categories

SMD LED 5630 0.5W

●Viewing angle:120 deg
●The materials of the LED dice is InGaN
●5.60mm×3.00mm×0.77mm
●RoHS compliant lead-free soldering compatible

Send InquiryChat Now


 Feature

Viewing angle:120 deg                        

The materials of the LED dice is InGaN          

5.60mm×3.00mm×0.77mm                     

  RoHS compliant lead-free soldering compatible


 Package Outline      

Unit:mm

图片28.png


NOTES:  

1. All dimensions are in millimeters;   

  2.Tolerances are±0.1mm unless otherwise noted.


Absolute maximum ratings                                 Ta=25±3

Parameter

Symbol

Value

Unit

Power dissipation

Pd

0.5

W

Forward current

If

150

mA

Reverse voltage

Vr

5

V

Operating temperature range

Topr

-40~+85

Storage temperaturer range

Tstg

-40~+100

Pulse Forward Current

Ifp

200

mA

Electrostatic Discharge

ESD

2000(HBM)

V

●Electro-optical characteristics                   Ta=25±3

Parameter

Test Condition

 

Symbol

 

Value

Unit

 

Min.

Typ.

Max.

Forward voltage

 

If=150 mA

Vf

6.0

--

7.0

V

Luminous intensity

 

If=150 mA

Φ

100

--

120

Lm

Viewing angle 50% Iv

If=150 mA

2θ 1/2

--

120

--

Deg

Reverse current

 

Vr=5V

Ir

--

--

10

μA

ColorTemperature

 

If=150 mA

TC

--

3000

--

K

Chromaticity CIE

 

If=150 mA

CIE

               Color different≤5

CRI

 

If=150 mA

Ra

80

 

NOTES: 




1.Luminous Flux measurement tolerance:±10%


2.Forward Voltage measurement tolerance:±0.1V


3.Color Temperature measurement tolerance:x,y±0.01


4.CRI measurement tolerance:±2



 Intensity Bin Limit (IF = 150 mA) 

Bin code

Flux(lm) for reference

Min

Max

1

90LM

100LM

2

100LM

110LM

3

110LM

120LM

4

120LM

130LM

5

130LM

140LM

6

--

--

7

--

--

8

--

--

9

--

--

 VF Bin Limit (IF = 150 mA)

Bin code

Min.(V)

Max.(V)

1

6.0

7.0

2

--

--

3

--

--

4

--

--

5

--

--

 Chromaticity CIE

图片18.png

 Color Bin Limit (IF =150 mA)



Requirements for application and reflow soldering

Reflow Soldering

Pre-heat

 

120~160

Pro-heat time

 

120 seconds Max.

 

Peak temperature

 

245℃ Max.

 

Soldering time

 

10 seconds Max.

 

Condition

 

Refer to Temperature-profile


After reflow soldering rapid cooling should be avoided

Temperature-profile(Surface of circuit board)  

Use the following conditions shown in the figure.   

     

 <Pb-free solder>                           <Lead solder>

图片21.png

1.Reflow soldering should not be done more than two times    

2.When soldering,do not put stress on the LEDs during heating



Handling Precautions

Compare to epoxy encapsulation that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more prone to damage by external mechanical force. As a result, Special handling precautions must be observed during assembling using silicone encapsulated LED product, Failure to comply might leads to damage and premature failure of the LED.

 

♦ Handle the component along the side surface by using forceps or appropriate tools; do not directly touch or handle the silicone lens surface, it may damage the internal circuitry.

 

♦ Not suitable to operate in acidic environment, PH<7.

 

♦ LED operating environment and sulfur element composition cannot be over 25 PPM in the LED mating usage material.

 

When we need to use external glue for LEDs application products, please make sure that the external gluematches the LEDs packaging glue. Additionally ,as most of LEDs packaging glue is silica gel, and it has strong Oxygen permeability as well as strong moisture permeability; in order to prevent external material from getting into the inside of LEDs, which may cause the malfunction of LEDs, the single content of Bromine 

element is required to be less than 225 PPM,the single content of Chlorine element is required to be less than225PPM,the total content of Bromine element and Chlorine element in the external glue of the applicationproducts is required to be less than  375 PPM.

 

♦ The encapsulated material of the LEDs is silicone. Therefore the LEDs have a soft surface on the top ofpackage. The pressure to the top surface will be influence to the reliability of the LEDs. Precautions should betaken to avoid the strong pressure on the encapsulated part. So when using the picking up nozzle, the pressureon the silicone resin should be proper.

 

♦ Static electricity or surge voltage damages the LEDs. Damaged LEDs will show some unusual characteristicssuch as the lower forward voltage, or the not light at low current, even not light. All devices, equipment andmachinery must be properly grounded. At the same time, it is recommended that wrist bands oranti-electrostatic gloves, anti-electrostatic containers be used when dealing with the LEDs.

 

Storage

♦ Before opening the package, the LEDs should be kept at 30 or less and 60%RH or less. The LEDs shouldbe used within a year.

 

♦ After opening the package, the product should be stored at 30 or less and humidity less than 10% RH, andbe soldered within 24 H. It is recommended that the product be operated at the workshop condition of 30or less and humidity less than 60% RH. If unused LEDs remain, they should be stored in moisture proofpackages, such as sealed containers with packages of moisture absorbent material (silica gel). It is alsorecommended to return the LEDs to the original moisture proof bag and to reseal the moisture proof bagagain.


Packaging & Delivery

 4000pcs/reel, each reel Anti-static vacuum Bag


 Delivery  Time
 Shipped in 3-5 days after payment



 image005(005).jpg

 


Our Services:

●Reply your inquiry in 24 working hours

●Well-trained and experienced staffs to answer all your inquiries in English.

●Strict quality control procedures before shipment.

●Customized design is available.OME and ODM are welcomed

●Delivery the goods to our customer all over the world with speed and precision.

  

FAQ 

 Q1.what's  your hot sales of this year?
 A: Most of our SMD LED are  selling quite good. Among them , the top 3 are 5630 SMD LED, 5630 SMD LED and EMC3030. 


 Q2:Do you  have any MOQ limit for led light order?
 A: No MOQ, 1pc for sample  checking is available. 


 Q3.Do you  offer OEM product?
 A: Sure, we provide all kinds  of choices for our clients and customized product is welcome. Please inform us  formally before our production and confirm the design firstly based on our  sample. 


 Q4. How do  you ship the goods and how long does it take to arrive?
 A: we usually ship by DHL, UPS,  Fedex or TNT. It usually take 3-7 days to arrive. Airline and shipping are also  optional. 


 Q5.Do you  offer guarantee for the products?
 A: Yes , we offer 3 years  warranty for our products.

 

Company

image008(001)_副本(001).jpg


Patents

zhengshu副本(001).jpg


Contact:

Alisa Huang

Guangdong Elite Optoelectronic Technology Co., LTD

Mobilephone:+86-18033336027

Tel:0769-89080660-824

Fax:0769-89080658

Email:ruilu_sales1@elitebm.com


Contact: Carol Chen

Mobilephone:+86-13798703095

Telephone:+86-769-88941998

Email:elite1@elitebm.com


Hot Tags: SMD LED 5630 0.5W, China, suppliers, manufacturers, price

Inquiry